Fire Pumps

Fire pumps can be one of the most intimidating aspects of fire protection for clients. Well maintained automatic fire pump systems are very reliable and play a key role in reducing death rates and property damage during fire emergencies. Regular inspections and testing goes a long way toward making sure your fire pump offers you full fire protection.

Fire Pump Inspection

Like all other equipment, fire pumps deteriorate over time. Fire pumps are also vulnerable to external factors such as corrosive environments, tampering, accidental damage, and careless use. Since they are used so infrequently, fire pumps must also be routinely inspected to determine their condition, operability, and need for routine maintenance. Performance Fire Systems, Inc., offers fire pump testing to comply with NFPA, CSFM and local requirements.

Fire pumps are required to be tested weekly and we can provide weekly service/testing as well as service at other intervals. All weekly and quarterly testing contracts include the annual fire pump performance test required by NFPA. This test involves flowing water through pitot tubes and establishing performance thresholds for fire department compliance. Diesel fire pumps testing includes maintenance of engines, batteries, and fuel tanks.

Our services include, but are not limited to:

Shaft Alignment

One of the most crucial steps of fire pump inspection is making sure your fire pump’s couplings are aligned properly. There are many factors that can affect alignment, including thermal expansion and equipment maintenance. Couplings that are misaligned are far more likely to fail and could cause disruption of service.

Circulation Relief Valve Inspection

Circulation relief valves are usually mounted on the neck of the discharge flange and prevent the fire pump from overheating when the pump is operating at shutoff condition. The valve should be inspected weekly and should discharge to a drain. Visual inspection of the fire pump is critical because if the valve fails to operate, the fire pump could overheat at a time when it is needed most.

Fire Pump Testing

It is highly recommended that all fire pumps undergo weekly testing at shutoff conditions. Electric fire pump systems should be tested for 10 minutes, while diesel fire pump systems should be tested for 30 minutes. Annual testing is conducted at minimum, rated, and peak load to ensure that the fire pumps will work optimally under all of these conditions. Annually, demand must be placed on the suction supply to test the hose streams and flow meter systems. Guardian will also check the pump controller and current draw of the pump as well as motor rotation and RPM speed.

Fire Pump Maintenance

Fire pumps must undergo regular preventative maintenance to ensure that they maintain their effectiveness. One of the most common maintenance measures is proper bearing lubrication. Generally, an ounce of grease should be added to the bearings every 3 – 6 months, and care should be taken to not add too much grease.

Why Choose Performance Fire Systems, Inc.?

Proper and efficient fire pump service for commercial or residential building ensures the building, its contents, and its occupants are safe and secure in the event of a fire. At Performance Fire Systems, Inc., we have the tools, skills, and expertise required to keep your building safe and code-compliant no matter what industry you’re in.

Our service personnel are continuously trained using seminars conducted by industry experts. We service fire pumps with the latest technology and methods to ensure your system is operating at peak performance. Whether it is weekly, monthly, or annual inspections, your pump will be ready when needed.

We strive for excellence and delivering superior service to our customers. We appreciate the opportunity to earn your business and keep your investments safe. Contact us today!